Windows 11 upgrade

Move Windows 10 to Windows 11, controlled in the maintenance window

fliix Ops raises Windows clients to Windows 11 in the maintenance window and then keeps them on a version Microsoft still supports. Pilot devices go first, and devices that Windows reports as not compatible are skipped with the reason.

The Windows compatibility check Pilot devices first A way back to the previous version

The short answer

How do I move many PCs to Windows 11?

Support for Windows 10 Home, Pro, Enterprise and Education ended on 14 October 2025; LTSC editions have their own dates. Since then, security updates are available only through Microsoft's ESU programme, which is paid and time-limited for businesses. Anyone still running Windows 10 devices needs a plan for each of them.

In fliix Ops this is a maintenance window step: "Raise the Windows version" with the option "Upgrade Windows 10 to Windows 11". The device downloads the new version through Windows Update the day before the window and installs it in the window. Programs, settings and files are kept.

Beforehand the device reads the result of the Windows compatibility check. If Windows reports it as not compatible, for example because of TPM, processor or Secure Boot, the step skips it and names the reason. After the first run you see which devices have moved and which need replacing.

Workflow

From the pilot device to the whole fleet

  1. 1

    Enable the step

    In the maintenance window you enable the step that raises the Windows version and choose the target: the recommended version or a specific Windows 11 version.

  2. 2

    Run the pilot

    A new version goes only to devices tagged "Pilot" at first. All others follow after seven days without errors and at least one success.

  3. 3

    Check and raise

    Every device checks compatibility, free disk space and mains power. It then downloads the version the day before and installs it in the window. The window's restart starts the new version.

  4. 4

    Verify

    After the restart the device reports the new build number. The upgrade is listed in the update history and in the monthly report.

What is included

What keeps the move under control

Devices with less than 20 GB of free disk space, on battery or with a pending restart are skipped, with the reason in the run.
If a version fails in the pilot, the pilot phase starts again. Too many failures block the version in the tenant.
"Restore previous version" takes a device back as long as Windows keeps the old version, usually ten days.
If the new build number does not arrive within 24 hours, the upgrade counts as failed. The device tries again after 14 days.
Per device you see which version is running, until when Microsoft supports it and what the window intends to do.
With the target "Recommended", devices later follow new Windows 11 versions without you changing the window.
On HP, Dell and Lenovo devices that already start with UEFI, Secure Boot and TPM can be switched on through the vendor's BIOS interface: in the maintenance window or directly in the finding on the device (Full). If the BIOS has a password, it must be stored.
If an HP, Dell or Lenovo device still starts in legacy BIOS mode (Legacy/CSM), "Switch to UEFI" converts it: the agent checks the system disk with Microsoft's MBR2GPT, sets the BIOS to UEFI with Secure Boot and converts the disk from MBR to GPT. If a step fails, it sets the BIOS back (Full).
A target version set by Group Policy or Intune stays untouched.

Limits

What fliix Ops does not do here

  • The hardware requirements of Windows 11 are not bypassed. A device that Windows reports as not compatible stays on Windows 10.
  • The step applies to clients only. fliix Ops does not raise Windows Server to a new version.
  • fliix Ops converts a device in legacy BIOS mode to UEFI only one at a time and after an additional confirmation, never in the maintenance window and never as a bulk action. If the system drive is unlocked with a PIN or startup key, you convert the device on site.
  • The upgrade runs through Windows Update, not through an image of your own. A reinstallation or a change of edition is not part of it.
  • Once downloaded, Windows Update may install the new version by itself before the window starts.
  • On the way back to the previous version, programs and settings since the upgrade are lost; files are kept.

Licence

Which licence includes this?

Raising the Windows version in the maintenance window is part of Windows Agents Lite and Full. Switching on Secure Boot and TPM through the BIOS and the switch to UEFI are part of Full.

FAQ

Frequently asked questions about the move to Windows 11

How do I know which devices cannot run Windows 11?
On every device the step reads the result of the Windows compatibility check. It skips devices that are not compatible and names the reason in the run, for example TPM, processor or Secure Boot. That list is your basis for replacement purchases.
What if Secure Boot or the TPM is merely turned off?
Then it can often be fixed without an on-site visit. With the Full licence, fliix Ops switches both on through the vendor's BIOS interface on HP, Dell and Lenovo devices: as a separate maintenance window step or directly in the finding "Secure Boot or TPM off" on the device. If Secure Boot is off because the device still starts in legacy BIOS mode, the window step does not help. You then convert the single device with "Switch to UEFI", after an additional confirmation.
Are programs and data kept during the move?
Yes. The new version arrives as a feature update through Windows Update. Programs, settings and files stay on the device.
Can I take a device back to the previous version?
Yes, as long as Windows still keeps the previous version, usually ten days. It happens only at the push of a button. Programs and settings since the upgrade are lost; files are kept.
Does fliix Ops move devices to Windows 11 by itself?
No. The step "Raise the Windows version" is off by default, and so is the option "Upgrade Windows 10 to Windows 11". You turn both on per maintenance window: in the settings under "Maintenance windows", in the window under "Steps in the window". Without the option, Windows 10 devices stay on Windows 10.

Plan the move instead of touching every device by hand

In the demo you see the step in the maintenance window, the skipped devices with their reason and the way back.